Diaphragm type hydropneumatic accumulators >

H/250-210 SERIES

Technical Features

Test pressure (PT): PS x 1,43.

Body: in cold formed steel.

Constructive methodology: end parts welded in protected argon atmosphere.

Working temperature for standard execution: from - 20°C to + 80°C.

Standard diaphragm: non replaceable can be used with mineral oils and non corrosive fluids.

Installation: in every position.

Compression ratio:

- recommended: P2/P0 = 2.5.

- maximum: P2/P0 = 4.

Mechanical life: the number of cycles is inversely proportional to the increase of the compression ratio

Also available:

- H.. LT series for working temperature till – 40°C.

- diaphragm for working with aggressive Fluids.
According to: 97/23/CE-PED, 94/9/CE-ATEX Group II Cat 2, GOST-R (Russia), SELO (China).

Codice	Pressione massima	Volume azzoto (Lt)	Precarica max (Bar)	H	D	E	C	B	Connessione idraulica	Portata massima	Peso
H100R	250	0.15	160	142	70.00	45	23.0	15.0	M 18X1,5	40	1.20
H100V	250	0.15	160	142	70.00	45	23.0	15.0	M 18X1,5	40	1.20
H350R	250	0.35	160	205	70.00	35	23.0	15.0	M 18X1,5	35	1.70
H350V	250	0.35	160	205	70.00	35	23.0	15.0	M 18X1,5	35	1.70
H500R	250	0.45	160	167	92.00	55	23.0	17.0	M 18X1,5	50	1.90
H700R	250	0.70	160	220	92.00	40	23.0	17.0	M 18X1,5	40	2.70
H700V	250	0.70	160	220	92.00	40	23.0	17.0	M 18X1,5	40	2.70
H1000R	250	1.00	160	200	115.00	60	23.0	19.0	M 18X1,5	50	3.50
H1400R	250	1.40	160	270	115.00	60	23.0	19.0	M 18X1,5	40	4.90
H2000R	250	2.00	160	350	115.00	60	23.0	19.0	M 18X1,5	40	5.80
H4000R	210	3.80	135	320	170.00	95	23.0	19.0	3/4"	80	14.00

Note

QTY + -