The “LV” level gauges allow the visualization of the fluid level through a transparent tube connected to the tank. O-Ring are located in all joining points to allow a perfect sealing even when the unit is mounted on a non perfectly flat surface. The tube protection can be orientated on a 180° angle and the mobile heads permit to recuperate drilling mistakes on fixation holes centres up to +4mm. Besides mineral oils they can be used with other not aggressive fluids. They can be supplied with thermometer fit inside the sight tube (LVT series) or with electric contact when reaching minimum oil level (LVSE series). They can be supplied with 2,5 meters of maximum length.
Technical Features:
Fixing heads: in nylon filled with fiberglass.
Protection: in anodised aluminium.
Transparent tube: in Perbex methacrylate.
Fixing screws: in zinc-plated carbon steel.
Installation: in vertical position with two M12 threaded holes or two Ø 13 mm passing holes.
Standard axle base: 127mm or 254 mm.
Working temperature:
- from +5°C to + 80°C for the “LVSE” execution.
- from -20°C to +80°C for the others execution.