Technical Features
Test pressure: PSx1,43.
Body: made in painted carbon steel.
Working temperature (TS): from - 20°C to + 80°C.
Standard bladder: can be used with mineral oils and non corrosive fluids.
Installation position: from vertical (nitrogen valve upward) to horizontal position.
Compression Ratio:
- recommended: P2/P0 = 2.5.
- maximum : P2/P0 = 4.
Mechanical life: the number of cycles is inversely proportional to the increase of compression ratio. Top reparable.
Available:
- inside and outside epoxy painted body.
- inside an outside nickel-plated body.
- special bladder: FPM – EPDM – HYTREL – HNBR ecc…
- bladders for working temperatures till 150 °C.
- HTR .. LT series for utilization oil. temperature to – 40°C.
- hydraulic connection ½”BSP for the models marked with (*).
- special execution for high pressions.
According to: 97/23/CE-PED, 94/9/CE-ATEX Group II Cat 2, GOST-R (Russia), SELO (China).