USE AND OPERATION:
Pilot check valves are used to block the actuator
in both directions. Flow is free in one direction and
blocked in the reverse direction until pilot pressure
is applied. This valve is ideal for very short distance
centre cylinders and is fixed on them by a drilled
screw supplied with the valve.
MATERIALS AND FEATURES:
Body: zinc-plated steel.
Internal parts: hardened and ground steel.
Seals: BUNA N standard.
Tightness: ball type; any leakage.
APPLICATIONS:
Connect V1 and V2 to the pressure flow and C1 and C2 to the actuator by the screw.